Products

JINFLEX-LPG

Applications

Jinflex-LPG White hose is especially designed for use with fully refrigerated conveyants down to -50 °C on ship, barges and in marine terminals. This application is including the following mediums: Ammonia, Acetaldehyde, Butadiene, Butane, Propane, Butylene, Dimethylamide, Ethylamine, Ethyl Chloride, Methyl Acethylene, Methyl, Bromide Propane, Propadiene, Propylene, Vinyl Chloride and Refrigerant Gases. Jinflex-LPG White is also suitable for Liquid Ethylene at -105 °C, Liquid Ethane at -88°C.

Construction

Inner wire	Stainless steel 316	Lining	Polyamide fabrics and BOPP films
Outer cover	Polyamide	Out wire	Stainless steel 316

Physical properties

Maximum elongation	10% on proof pressure	Max flowrate	on request
Electrical resistance	≤ 2.5 Ohm/m for sizes less than 50mm ≤ 1.0 Ohm/m for the 50mm size and above sizes	Max tensile strength	on request
Maximum twist	10˚p/m	Pressure losses	on request
Vacuum range	0.5 bar	Temperature range	-30°C up to +80°C
Min. burst pressure	5 x working pressure (safety fact 5:1)	For liquid ethylene	-105°C up to +50°C

Certifications

Jinplex-LPG White hoses are produced and tested according international standards like EN 13766:2018 & IMO code Gas Carrier code

Jinflex-LPG WHITE

Bore Diameter		Available length	Max. Working Pressure		Bend Radius		Weight
INS	MM	Metres	BARS	PSI	INS	MM	KG/M	LB/FT
1	25	25M	25	367.5	100	100	1.0	0.7
1.5	38	25M	25	367.5	140	250	1.5	1.0
2	50	25M	25	367.5	180	180	2.5	1.7
2.5	65	25M	25	367.5	205	205	3.3	2.2
3	75	25M	25	367.5	280	280	4.5	3.0
4	100	25M	25	367.5	395	395	7.5	5.0
6	150	25M	21	308.7	510	510	13.5	9.0
8	200	25M	21	308.7	760	760	18.5	12.4
10	250	25M	15	217.5	915	915	25	17.4